The Flute Learning Curve

The Flute Learning Curve

 When one begins to learn flute there is a lot to think about: developing a correct embouchure shape, the blowing angle, proper breathing, finger placement, standing position - even just holding the instrument properly. Simply managing the making of tone of any kind is an achievement! Almost always the first sounds are often very breathy, weak and inconsistent. Very frustrating for all. 

However, if one is patient control begins to develop with practice and repetition and eventually the beginner becomes functional over a range of the first and perhaps second octave of the instrument. This is enough for most players to join a group, play some solos and generally feel good about their music making. 

At some point comes the realisation that not every note is sounding as good as the others and some notes may seem more difficult to play and possibly even be out of tune with other instruments in the group or band. At this juncture the guidance of an experienced teacher, if this has not already been available, becomes a necessity - for learning how to focus and shape each individual tone to sound its best and to take its place in a reliable, predictable intonation pattern is vital. This is a goal of every player and careful attention needs to be paid to fundamentals to achieve this.

Here is a short checklist:

• Is my stance correct, i.e. balanced weight, feet spread apart, able to move without tension?
• Am I breathing fully and supporting the breath well once taken?
• How are my lips 'addressing' the embouchure hole? Are they relaxed and supple?
• How and where am I directing my air stream?
• How efficient am I being when moving across larger leaps or octaves?
• Are my lips under control - moving easily and only as required?
• Is the tone quality the same throughout all registers?
• Can I play upper notes quietly and lower register notes loudly?
• Do all notes respond to slurring as well as tonguing?
• Can I play softly and stay in tune (avoiding the pitch dropping)?
• Can I play loudly and not go sharp?
• Am I tonguing efficiently or is my tongue stroke disrupting my lips?

Also check:

• Is my headjoint cork in the correct position? (Insert the bottom of the cleaning rod and check the line is in the centre of the embouchure hole)
• Have I pulled out the headjoint an 'appropriate' amount? (For most players approx 6-8mm to A440 pitch position)

All the above points deserve consideration and the time spent improving and developing control will be very valuable. As a general observation improving or intermediate players often play sharp without being aware of it and, until remedies are pointed out to them, they will not know how to respond. Just pulling out the headjoint is not enough as every note has its own 'best' embouchure and blowing angle.

Practice with a tuner will help (and probably shock initially) but eventually the intonation pattern of the instrument begins to be revealed. When this is observed then attention can be given to making the appropriate corrections required while playing to achieve proper tuning. This process can be helped enormously by remembering that very few good sounding, centered and attractive tones will be far if at all 'out of tune' whereas almost all bad sounding notes will be! This leads to a very memorable sentence:

Good in-tone-ation leads to good in-tune-ation.

 

As a quick aid this catchy concept is hard to beat and it can lead on to a lifetime of rewarding and efficient practice. As one reaches top levels of achievement standards the challenges do not end they just change and a player will become able to handle more difficult passages with ease but when faced with something daunting must still go back to basics to figure out how to tackle the problem and somehow make the seemingly impossible appear not only possible but beautiful!

 

 The tips and comments above are the result of many years of providing help and advice, my personal interest and study, and the teaching that I have done during my career. I have many colleagues and teachers to thank for sharing their thoughts and suggestions on this and other topics. In addition I am indebted to Woodwind & Reed, Cambridge ( www.wwr.co.uk ) where, in the course of helping customers, many of these concepts have been refined and have proven helpful.

Thomas Dryer-Beers

Tips on How to Trial a Saxophone CASS Article

 

Tips on How to Trial a Saxophone

From CASS article on Choosing a Saxophone, by Thomas Dryer-Beers

   

Tips on How to Trial a Saxophone

• Play all instruments with a mouthpiece and reed that you know well. Too many variables make attempting comparisons a nonsense.
• Take along or have in mind some music you are familiar with of the type you wish to play - be prepared.
• If you know the technique of over-blowing octaves and twelfths use this to see whether the instrument is 'in tune with itself'. Alternatively find a reliable 'fixed pitch' source and carefully tune to it. You can get a very poor feeling from an instrument if you do not get the mouthpiece correctly positioned on the crook for proper tuning. Be wary of relying on electronic tuners. All saxophones are acoustic compromises. When you use a tuner you are generally learning more about yourself and how you play than about any individual instrument.
• Test a range of volumes. Instruments reveal more of their tonal colour when blown loudly but you will want to know that you can sustain the sound softly as well.
• Other than checking for finger fluency and comfort, fast notes don't inform you nearly as well as sustained tones. A point worth remembering is that spring tensions or keys can be adjusted if they are too strong or too weak. Never reject an instrument because a spring feels odd.
• Test the response at the high and low extremes of the range but don't expect miracles - especially when tonguing. It takes a while to really get to know a new instrument and you may need to make some adjustments (for the better - this is known as 'progress'!). If you select a sax that plays just like your old instrument you have to wonder whether the purchase was worthwhile.
• Compare alternative fingerings, e.g. the several Bb, C, F# options to see if the instrument has been well set-up. This can be an indication of good preparation by the seller.

It is worth considering that you are most likely to choose a sax that suits your own level of ability (as long as finances permit). Therefore, as every individual is unique, not all players will find themselves choosing the same model. 

What matters most is that the saxophone selected is one that will provide you with the greatest encouragement and inspiration for your musical future.

--------------

The tips and comments above are the result of many years of providing help and advice, my personal interest and study, and the teaching that I have done during my career. I have many colleagues and teachers to thank for sharing their thoughts and suggestions on this and other topics. In addition I am indebted to Woodwind & Reed, Cambridge ( www.wwr.co.uk ) where, in the course of helping customers, many of these concepts have been refined and have proven helpful.

Thomas Dryer-Beers

CASS Article - Choosing a Saxophone - Incorporating How to Trial an Instrument

Choosing a Saxophone

 Written for the Clarinet and Saxophone Society Journal of Great Britain

an article by Thomas Dryer-Beers

Choosing a saxophone, either to begin one's studies, to indulge a long nurtured wish to play or to invest at the professional level on 'an instrument for life' has in many ways never been easier. The quality of the various models available is generally high at all price levels - the differences between similarly priced saxophones are not huge and even the variation between starter instruments and top of the range models is relatively small. This means that in many ways it is difficult to make a truly bad investment as long as one is aware of a few important points.

Saxophones seem to be offered from all corners of the world these days. Gone are the times when the only choice seemed to be to buy French or American. Very successful instruments are now also being manufactured in Japan, Germany, the Czech Republic, Italy, the numerous workshops of Taiwan and in recent years China, and one can become overwhelmed indeed! Added to this there is increasing globalisation of parts manufacture, assembly and sourcing of the accessories that come supplied with an instrument.

Improving designs and standards of manufacture in student saxophones and fierce competition in professional pricing have meant that the notion of an intermediate instrument, in anything other than price, is almost completely gone. Many models that were considered to be of professional standard 30-50 years ago would no longer be recommended by teachers as adequate for learning. Many once rather expensive student models have been supplanted by better-designed and less expensive new models.

In order to form an unbiased opinion of the performance of an instrument (indeed even models by the same maker) each saxophone should be evaluated on its own merits, not necessarily by its name or past history. Responsible music shops undertake just such evaluations on a continuing basis in order to be able to offer their customers the best of all the available models. This helps to ensure that as much as possible, your choice of saxophone will be of the correct standard to do the job for which it is being purchased.

Beginner Level Choice

Since so many makes of student instruments have borrowed (even directly copied) features of dominant professional instruments, it is now possible to experience the feel of many top name saxophones in some budget priced models. Some recent models have borrowed keywork design, others body tube proportions, and others attempt to reproduce the weight or mass in the brass alloy used.

So, how can a new player begin to select their sax? A good way to start perhaps, is by conversing with knowledgeable sax playing colleagues, teacher to be, school etc. Then select a recommended specialist shop in which you can have confidence. A definite plus will be a shop with in-house repair technicians as their contribution is vital in ensuring a good experience.

When you visit you should explain your situation and ask to view recommended models within an affordable price range. Having been provided with a selection of instruments to hold, or better yet to play, however inexpertly, players will almost always to be able to identify something that will help them form preferences and eventually lead them to a selection. All the many contributing factors which make up the instrument contribute to a 'feel' and players will often separate themselves broadly into two categories - those who, particularly at the earliest stages, wish to experience playing as easily as possible, and those who are looking for something more than just ease of blowing in the character of sound. I should quickly say that such a comparison test will be most useful if the same mouthpiece and reed are used across all the instruments tried. More on that later.

Any good quality beginner model is likely to see a young player through at least grades five to six. If they are keen to continue to play then their investment in a good student instrument will then have prepared the way for a smooth transition to a professional instrument when the time is right. As a result, I feel that a new player's early preferences for sound and feel can be indulged largely without adverse consequences. What really matters is that the instrument selected be well made and that a suitable, good quality mouthpiece is obtained. It is now possible to invest well at the beginning, upgrade a quality student instrument with a 'professional' mouthpiece and later purchase a 'top-grade' pro model after a few years of experience (perhaps around grade seven to eight level) with neither your learning opportunities or your bank balance suffering inordinately. I feel that this development should be very encouraging to players and might inspire greater confidence in parents with children eager to learn.

What Constitutes Good Value?

Ask a good repairer and they will confirm that even the best pads, properly seated, will not perform well if there is motion in the fit of the keywork or poor regulation. It is worth checking closely how much long key rods (such as those used for the G key, high E and bell B and Bb) are able to 'move about' when pushed sideways. Similarly, check how much lateral travel short keys like side Bb, high F and palm D experience under stress. As the fit of these keys is dependent upon both the quality of materials and good construction standards (contributing to additional expense for the manufacturer) many cheaper instruments will not pass this 'fitness' test. Such an instrument will probably have other manufacturer related problems and will be likely to become unreliable and expensive to maintain in the future. If regulations, particularly those which govern the articulated G# key, the left hand C correspondence and the related closure of the bis Bb key are not correctly set, then the finest instrument will perform little better than the worst. If an instrument is soundly made and well set-up it will be much more likely to play satisfactorily for longer and, when maintenance work is required (as it surely will be in time) the job will go much better.

Professional Level Choice

This brings me to the vexed topic of professional models. How does one choose with confidence? In the broadest terms a musician selects a saxophone at this level as a 'tool of the trade'. Does it do what he/she wants it to do? Will it be respected in musical circles? Does it fit the image of what an instrument should be? All of these points are valid ones but for me the bottom line is much simpler.

Does this instrument inspire you to want to practise and play? If so, then you are surely on to a winner. Remember also - If they all seem so good that you cannot choose between them, then you cannot truly consider any choice a mistake.

Every person's experience is bound to be different. Some find the right saxophone early on and then continue to use it out of preference throughout their lifetime. Others find that their changing tastes, the introduction of new products, a change of circumstance, professional opportunities, etc. will dictate that many different saxes be purchased during the course of a career. As long as you are being well served by your instrument you should feel good!

Before closing it is worth mentioning something regarding the increasing diversity of metals being used for saxophone bodies and the many finishes which now proliferate. In my personal opinion these are largely a diversion from the real essence of an instrument. Each reputable manufacturer attempts to create an identity for their products. Each seeks to create a consistency in the feel, intonation, resistance, appearance and tonal colour to unify their models. In general, such identity is achieved through the acoustic design of instruments, through some specific keywork features and very importantly, via the body tube mass/alloy used. Cosmetic finishes on the standard brass tubing e.g. silver plate, enamel of any colour or lacquer have a proportionally minute effect when compared with the more important structural elements. 

Different metals such as bronze, silver or nickel do make more of a difference, as the instrument will actually resonate with different frequencies given prominence by the vibrating metal. Even this is moderated by the fact that, unlike brass instruments, the tube of the sax is not fully engaged at all times in vibration. Patently it has holes in it and with the dampening effect of lots of leather pads affecting every note differently the overall contribution of these various materials is diminished. If looks are very important to you then by all means select from the range of options available with the knowledge that not much benefit comes from the finishes, and the confidence that not much loss occurs either. I'll always go with what really plays for me.

One of my teachers once gave me some very wise advice whilst encouraging me to consider the benefits I might gain from changing my own well-loved instrument for another. He implored me to 'learn to love the saxophone not a saxophone'. These words have proved themselves invaluable numerous times during my own musical career and never has this advice seemed more appropriate than during the preparation of this article.

How To Trial An Instrument

• Play all instruments with a mouthpiece and reed that you know well. Too many variables make attempting comparisons a nonsense.
• Take along or have in mind some music you are familiar with of the type you wish to play - be prepared.
• If you know the technique of over-blowing octaves and twelfths use this to see whether the instrument is 'in tune with itself'. Alternatively find a reliable 'fixed pitch' source and carefully tune to it. You can get a very poor feeling from an instrument if you do not get the mouthpiece correctly positioned on the crook for proper tuning. Be wary of relying on electronic tuners. All saxophones are acoustic compromises. When you use a tuner you are generally learning more about yourself and how you play than about any individual instrument.
• Test a range of volumes. Instruments reveal more of their tonal colour when blown loudly but you will want to know that you can sustain the sound softly as well.
• Other than checking for finger fluency and comfort, fast notes don't inform you nearly as well as sustained tones. A point worth remembering is that spring tensions or keys can be adjusted if they are too strong or too weak. Never reject an instrument because a spring feels odd.
• Test the response at the high and low extremes of the range but don't expect miracles - especially when tonguing. It takes a while to really get to know a new instrument and you may need to make some adjustments (for the better - this is known as 'progress'!). If you select a sax that plays just like your old instrument you have to wonder whether the purchase was worthwhile.
• Compare alternative fingerings, e.g. the several Bb, C, F# options to see if the instrument has been well set-up. This can be an indication of good preparation by the seller.

It is worth considering that you are most likely to choose a sax that suits your own level of ability (as long as finances permit). Therefore, as every individual is unique, not all players will find themselves choosing the same model. What matters most is that the saxophone selected is one that will provide you with the greatest encouragement and inspiration for your musical future.

The tips and comments above are the result of many years of providing help and advice, my personal interest and study, and the teaching that I have done during my career. I have many colleagues and teachers to thank for sharing their thoughts and suggestions on this and other topics. In addition I am indebted to Woodwind & Reed, Cambridge ( www.wwr.co.uk ) where, in the course of helping customers, many of these concepts have been refined and have proven helpful.
 

Thomas Dryer-Beers

Instrument Assembly Tips - Woodwind & Brass

We all are creatures of habit when it comes to assembling musical instrument(s). It is my hope that by observing the following tips one should be able to avoid creating problems and thereby help ensure the very best performance from the instrument. 

Note: Players have their own approach to assembly, sometimes informed, most often formed simply out of repetition. There is such a thing as 'best practice' in the assembly of an instrument. The bottom line should be to assemble (and disassemble) without putting delicate keywork or valves at risk. Thomas 

• Pay attention and handle with care - never in a rush 
• Avoid placing unnecessary pressure on key work or valves
• Keep all cork joints and valves/slides lubricated and metal cleaned
• Carefully clean following use

  

Instrument Assembly Tips

My suggestions are summarised below:

Flute – Make sure the tenon joints (headjoint and body tube) are clean and free of dirt and grease. Holding the main tube at the ferrule with the left hand, and the footjoint with the right hand positioned at the bottom with thumb on the low C-key, align the joints and twist the footjoint into place with a gentle back and forth motion. The pillar of the Eb/D#-key is usually positioned approximately 2/3 to 3/4  down the length of the D-key touch. Continue to hold the ferrule with the left hand and assemble the headjoint with the same motion. Align the headjoint by sighting down the flute from headjoint end after assembly and lining up the embouchure hole to proper playing position with the headjoint pulled out between 3-5mm for most playing situations.

Clarinet – Make sure the joints are well greased. Holding the upper joint between the LH fingers and palm (fingers where fingers go is an easy way to communicate this) and grasping the lower joint with the RH over the bottom of the joint with thumb closing the low E-key bring the joints together in a twisting motion rotating as you do so that the bridge key linking the RH rings to lift the LF Bb/Eb-key arm lines up properly. Continue to hold the clarinet in the left hand and add the barrel with a twisting motion then re-grasp the clarinet in the LH with the palm holding down both low E and F (F#)-key cups and add the bell with the twisting motion. It is traditional to line up the insignias when present but this is not vital. Finally add the mouthpiece to the assembled instrument pushing down while resting the clarinet bell on a chair or leg if desired. The reed can then be positioned with ease. The entire assembly (and disassembly) can be accomplished in under 10 seconds using this method.

Sax – Assemble the mouthpiece alone to the crook into rough tuning position first then add reed and ligature. Following that, grasp the instrument by the bell with the LH and taking the crook assembly with the RH over the top of the crook and with pressure exerted between palm and finger tips and slip a finger under the octave key arm near the pad (for alto and tenor sax). Then bring the crook and body together in a side to side rotating motion while watching that the octave key arm does not foul the octave key link tube on the sax body. This is to avoid inadvertently causing damage to the octave key extension are above the body or bend the delicate lever arm on the crook itself. When assembling double crook sopranos take care to hold the crook carefully between fingers and thumb at the octave key mount to better control the assembly and help avoid wrenching the octave key arm out of alignment.

Oboe – Make sure the joints are well greased. Grasping the upper joint in the LH between fingers and palm ‘fingers where fingers go’ and holding the lower joint in the RH with the bottom of the joint in the palm and thumb over the low B-key align the tenons and assemble with a small rotating back and forth motion while watching carefully that any link keywork is not damaged – ending up in proper alignment for G# regulation screw, conservatoire link keywork and duplicated trill key mechanism when present. This is often (but not always) achieved by lining up the pillar posts. Re-grasp the oboe bottom joint with the LH palm below the thumbrest and fingers curved over the feather key rod (the long key starting with the LH little finger touch and operating the low B and Bb-keys) and closing the RH finger keys and take the bell in the RH with thumb depressing the low Bb-key. With a rotating motion assemble and align the link key(s). Finally, add the reed last holding it with fingers squeezing at the thread and pushing the corked staple down into the receiver tube in the top joint. This is often made easier by resting the bottom of the bell on a chair and having both hands free to steady the oboe and insert the reed.

Bassoon – Make sure the joints are well greased. Take the wing joint in the RH with palm over the holes and finger tips in the ‘cut away’ on the opposite side. Insert the wing into the small hole of the boot joint and make sure the cut away portion is lined up with the larger hole (used for the long joint) in a concentric ark – make sure you do not damage the crook key link mechanism – it must finish up above the boot joint lever arm. Next grasp the long joint over the top end with the RH holding down the low B key with fingers and insert this joint to the boot joint larger hole being careful to not over rotate the joint and cause the low D#/C#-keywork to bash into the wing joint. Then rest the partially assembled instrument with the boot joint on the ground and holding the long joint with the LH over the B-key with palm grasp the bell joint with the RH placing the thumb over the Bb-key and assemble and line up the keywork. Add the ‘bird’ or handrest. The final stage of assembly is adding the crook (held between RH fingers and palm in the ‘middle of the bend’ to the top of the wing joint being careful to line up the ‘nipple’ with the crook key pad and add the reed last.

Brass –

Brass instruments are much simpler to handle and assemble but still deserve respect and consideration. Always try to avoid unnecessary pressure on slides and valves and take time to move the slides frequently to avoid them becoming 'locked in' or stuck. Take care to insert the mouthpiece with only a gentle twist into the receiver – never a tap!

Trombones are assembled with extra care with the slide lock engaged to avoid the outer slide shooting off out onto the floor and to avoid any chance of denting the slide itself. Once assembled the bell and slide should form an acute angle (at least a right angle) with the bell on the left for playing position and both the slide and the bell sections able to be held comfortably by the left hand palm, index and first fingers.

-------------

The tips and comments above are the result of many years of providing help and advice, my personal interest and study, and the teaching that I have done during my career. I have many colleagues and teachers to thank for sharing their thoughts and suggestions on this and other topics. In addition I am indebted to Woodwind & Reed, Cambridge ( www.wwr.co.uk ) where, in the course of helping customers, many of these concepts have been refined and have proven helpful.

Thomas Dryer-Beers